The m-tec hurrican-II is ideally suited for the modern processing of different dry mortars. In combination with m-tec free-fall silos or containers, it is used to feed processing machines such as the m-tec M330.
Time-consuming unloading, carrying, tearing open and filling of bags is a thing of the past. Due to the closed system of the hurrican-II, the material is transported directly into the processing machine.
The transport of heavy products over longer distances is possible without any problems. By means of an optional auxiliary compressor compressor, the performance can be significantly increased.
It is also possible to expand the m-tec hurrican-II for the processing of bagged goods is also possible. An optional suction device filters the dust is filtered by an optional suction device, which also enables rational and clean working is possible.
For details, please contact your local sales representative or
dealer. +49 7631 709 122
Our Specialist for:
- Adhesives dry
- Bricklaying mortar
- Cement plasters
- Finishing plasters
- Lime cement plaster
- Lime gypsum plaster
- Lime plaster
- Reinforcing and adhesive mortars
- m-tec filter hood
- m-tec transport hose
- m-tec mixing pump
- m-tec silo
*for reference only
|technical data||hurrican II 100:|
|compressor:||approx. 100 m³/h|
|drive motor:||5,5 kW, 400 V, 50 Hz|
|electrical connection:||400 V, 50 Hz, 3 ph|
|connecting cable:||5 x 2,5 mm²|
|connector:||CEE 16A, 5p, 6h|
|dimensions:||approx. 1050 x 550 x 650 mm|
|weight:||approx. 225 kg|
|silo connection:||NW 250|
|rotary drive:||0,18 kW, 400 V, 50 Hz, 3ph
Stecker 10 pol Typ H-B10
|dimensions:||990 x 640 x 730mm|
|weight:||approx. 95 kg|
Here you can download our brochure in PDF.