Mixer D10-III is the consistent development of our D10 mixer and once again attracts attention for its improved cleaning and mixing features. Thanks to the experience gathered with its tried and tested forebear, the D10, it has been possible to further optimize the D10-III for the demands of modern building sites. Thus, in addition to the processing of classic dry mortar products with granularity of up to 4 mm, it is also specially developed for fine-grained products with a high proportion of synthetic material, such as adhesives, bedding and leveling compounds or dry synthetic, silicate or silicon renders.
For details, please contact your local sales representative or dealer: +49 7631 709 122
Our specialist for:
- adhesives dry
- bricklaying mortar
- cement plasters
- concrete
- decorating plaster
- enriched special mortars
- fine concrete
- finishing plasters
- grout
- lime cement plaster
- lime gypsum plaster
- lime plaster
- loam products dry
- reinforcing and adhesive mortars
- restoration plaster
- structured and decorative renders
- thin layer gypsum and cement products
Applications*
- Construction chemicals
- Rendering
- Flooring
- Masonry
- ETICS
- Plastering
- Renovating
recommended accessories*
- Dry material probe
- Transport screw
- Protector to prevent dry running
- Stand with filling hopper
*for reference only.
Specifications
| Delivery volume: | standard approx. 15 l/min (depending on the transport and mixing shaft) |
| Drive motor: | 2.2 kW, 230/400 V, 50 Hz |
| Electrical connection: | 230/400 V, 50 Hz, 1/3 ph |
| Fuse: | 16/10 A |
| Connecting cable: | 3 x 2.5 mm² / 5 x 1.5 mm² |
| Connector: | Domestic socket/ 16 A, 5p, 6h |
| Water supply: | 3/4“ water hose with GEKA coupling, required water pressure/min. 2.5 bar while the machine is running |
| Dimensions: | approx. 1700 x 440 x 470 mm |
| Weight: | approx. 85 kg |
Here you can download our brochure in PDF.
