The solid building site mixer! – m-tec D20


Mixer D20 is a robust allrounder for processing dry mortar products with a granularity of up to 4 mm. It is the bestselling mixer in this class and, depending on the version, rationalizes the processing of decorative renders, bricklaying mortar or fine concrete.

For details, please contact your local sales representative or
+49 7631 709 122

Our specialist for:

  • adhesives dry
  • bricklaying mortar
  • cement plasters
  • decorating plaster
  • fine concrete
  • finishing plasters
  • lime cement plaster
  • lime gypsum plaster
  • lime plaster
  • loam products dry
  • reinforcing and adhesive mortars
  • restoration plaster
  • structured and decorative renders
  • thin layer gypsum and cement products


  • Construction chemicals
  • Rendering
  • Flooring
  • Masonry
  • Plastering
  • Renovating

recommended accessories*

  • All standard filter caps
  • water pump
  • feeding cap
  • flowmeter
  • insulating plaster mounting to increase the size of the material container
  • tarpaulin for material container

*for reference only.


Standard delivery volume: approx. 20 l/min (depending on the transport and mixing shaft)
Drive motor: 2.2 kW, 230 V, 50 Hz
Electrical connection: 230 V, 50 Hz, 1 ph
Fuse: 16 A
Connecting cable: 3 x 2.5 mm²
Connector: Schuko socket
Water pump: 230 V,
Water supply: 3/4“ water hose with GEKA coupling, required water pressure/min. 2.5 bar while the machine is running
Dimensions: approx. 1700 x 700 x 1,000 mm
Weight: approx. 90 kg


Here you can download our brochure in PDF.

Technology for better building

Cookie Consent with Real Cookie Banner