The intelligent silo mixer! – m-tec D50
Mixer D50 is fitted with highly modern PU components that guarantee economically effective and efficient operation. It is designed to process dry mortar products with a granularity of up to 4mm and is found on numerous building sites throughout the world. The D50 is used with bricklaying mortar and insulating mortar, plasters, screeds and fine concrete.
For details, please contact your local sales representative or dealer. +49 7631 709 122
Our Specialist for:
- bricklaying mortar
- cement plasters
- cementitious self- levelling
- concrete
- decorating plaster
- fine concrete
- finishing plasters
- floor screed
- grout
- lime cement plaster
- lime gypsum plaster
- lime plaster
- loam products dry
- restoration plaster
- self levelling products
- structured and decorative renders
Applications*
- Construction chemicals
- Rendering
- Flooring
- Masonry
- ETICS
- Plastering
- Renovating
Recommended accessories*
- mixing shaft
- Transport screw
- flowmeter
- tarpaulin for material container
- Control panel S40
- Blow-out device
*for reference only.
Specifications:
| D50 | |
| Conveying volume: | approx. 50 l/min (depending on the transport and mixing shaft) |
| Drive motor: | 4 kW, 400 V, 50 Hz |
| Silo connection: | ND 250 |
| Dimensions: | approx. 2100 x 350 x 350 mm |
| Weight: | approx. 140 kg |
| S40 | |
| Electrical connection: | 400 V, 50 Hz, 3 ph |
| Fuse: | 16 A |
| Connecting cable: | 5 x 1.5 mm² |
| Connector: | 16A, 5p, 6h |
| Water supply: | 3/4“ water hose with GEKA coupling, required water pressure/min. 2.5 bar while the machine is running |
| Dimensions: | depending on model |
| Weight: | depending on model |
Here you can download our brochure in PDF.
