The entry level mixer! – m-tec flotti
The flotti mixer is the economical entry level model of the m-tec continuous mixers and is a clever alternative to the drum mixer. The flotti mixer is used to process ready-mix dry mortars, such as bricklaying mortars, plaster and cement mortar, tile adhesive, anhydrite floor screed or decorative renders in a granularity of up to 4 mm.
For details, please contact your local sales representative or
dealer. +49 7631 709 122
Our Specialist for:
- Construction chemicals
- Rendering
- Masonry
- ETICS
- Plastering
- Renovating
possible products*
- adhesives dry
- bricklaying mortar
- cement plasters
- decorating plaster
- lime cement plaster
- lime gypsum plaster
- lime plaster
- loam products dry
- reinforcing and adhesive mortars
- structured and decorative renders
- thin layer gypsum and cement products
recommended accessories*
- tarpaulin for material container
*for reference only.
Specifications
| Delivery volume: | standard approx. 20 l/min (depending on the transport and mixing shaft) |
| Drive motor: | 1,3 kW, 230 V, 50 Hz |
| Electrical connection: | 230 V, 50 Hz, 1 ph |
| Fuse: | 16 A |
| Connecting cable: | 3 x 2,5 mm² |
| Connector: | Domestic socket |
| Water supply: | 1/2“ water hose with GEKA coupling, required water pressure/min. 2.5 bar while the machine is running |
| Dimensions: | approx. 1400 x 500 x 1000 mm |
| Weight: | approx. 90 kg |
Here you can download our brochure in PDF.
