P50 the flexible pump

The control cabinet of the m-tec® P50 has been deliberately designed as a separate unit. The control cabinet of the m-tec® P50 has been deliberately designed as a separate unit so that the pump can be quickly cleaned with a high-pressure cleaner. The clear design of the operating elements is also impressive. As is typical for m-tec, the m-tec® P50 has connections for operation with a compressor or for fully automatic feeding via a mixer.

m-tec® P50 Areas of application

The pump is suitable for a wide variety of dry mortar products such as flowing screeds, plasters, reinforcing and adhesive mortars, thin layer fillers or even levelling compounds.

Scope of delivery

The pump is supplied as standard with motor, material hopper, frequency converter control and hose pressure gauge.


The following accessories are available: pump end with pressure gauge, motor coupling with wear bush, mortar hoses, air hoses, remote control cable and more, please contact us.

Plus points

All P 50 models are built for the construction site and are equipped with an easy-to-clean stainless steel material hopper. Choose between a small (90 l) or large (120 l) material hopper, which can optionally be equipped with an additional mixing unit. This option is suitable for products that are difficult to mix, such as self-leveling concrete.


There are three options for the drives are available:
5.5 kW, 7.5 kW or 8.3 kW power. All drives drives can be controlled by a frequency frequency converter, allowing simple and and quick adjustment of pumping capacity.

Easy to use

Clearly structured controls, compact, lightweight design and locking system make the pump easy to operate.

Easy to transport

The large wheels and fold-out handles make life easier on the job site.

m-tec® technology for better building

m-tec® develops and manufactures construction site equipment for classic applications as well as for modern construction site tasks:
From the transport and supply of dry mortar products to their application on the construction site, we offer you everything from a single source. Throughout the world, in almost 100 countries around the globe, m-tec® has made construction better, faster and, above all, more economical.

That makes us unique.

Technical Data

Flowrate: approx. 30 – 140 l/min infinitely varaiable (depending on worm pump)
Delivery distance: up to 120 m
Delivery height: up to 40 m
Delivery pressure: up to 30 bar
Drive motor: 5,5-8,3 kW, 400V, 50 Hz
Electrical connection: 230/400 V,  50 Hz 1/3 ph
Fuse protection: 25 A / 32 A
Supply cable: 5 x 4,0 mm²
Plug device: 32 A, 3 p, 6 h / 32 A, 5 p, 6 h
Water connection: ¾“ water hose with GEKA coupling, required water pressure min. 2,5 bar with running machine
Dimensions: approx. 1400 x 640 x 540 mm
Weight: 110-170 kg

Flow rate, distance and height depend on the material being conveyed and the stator and rotor used.

For details please contact your local sales representative or
dealer. +49 7631 709 122

Here you can download our brochure in PDF.

Technology for better building

Cookie Consent with Real Cookie Banner