m-tec Silo Mixing Pumps: The Powerhouses for Your Construction Projects

the "big brothers" of mixing pumps

Silo mixing pumps

The m-tec® silo mixing pumps, also known as the "big brothers" of mixing pumps, are specifically designed for silo feeding. These continuously operating machines are ideal for mixing and pumping pumpable dry mortars. The dry mortar is fed directly from the silo into the mixing pump’s hopper, where a transport screw conveys the material into the mixing tube. There, a mixing auger, with the added water, transforms the material into a ready-to-use mortar.

Key feature of the SMP:

Our silo mixing pump SMP is distinguished by its patented dual mixing system. In this process, the dry material is first sprinkled into a water bath in the horizontal section for pre-mixing before it moves into the mixing tube. This additional mixing stage ensures a more homogeneous mortar mix and optimal integration of additives.

Conveying system:

Beneath the mixing auger, the material is transported through a feed screw, consisting of a rotor (screw) and a stator (screw casing), into the plaster hoses. The pump's conveying capacity can be precisely adjusted by selecting the appropriate transport screw and stator.

Efficiency through combination:

The combination of m-tec® silo mixing pumps and m-tec® silos provides the optimal solution for storing and mixing dry mortar products on-site. This system solution guarantees not only excellent mortar quality but also long conveying distances and efficient work processes.

The Evolution of the m-tec® Silo Mixing Pump EMP

The m-tec® EMP revolutionizes the processing of dry mortars when combined with the m-tec® Silo. This advanced solution not only offers optimal mixing and long conveying distances but also stands out with its easy handling and significantly reduced cleaning effort.

Have Questions or Need More Information?

We are happy to assist you! Contact us at: Tel.: +49 7631 709 122

Specializing in:

Gypsum plasters
Lime-gypsum plasters
Cement plasters
Lime plasters
Lime-cement plasters
Masonry mortar
Insulation plasters
Finish plasters
Reinforcement and adhesive mortars
Adhesives for high-performance products

Application Areas:

Construction chemistry
Coatings
Flooring
Insulation work

Recommended Accessories:

Rotors/Stators
Mortar hoses
Glue gun
Fine plaster spraying device
Silo and silo placing units

Tenichal Data

Flow Rate:	approx. 13 – 47 l/min (depending on version and screw pump)
Delivery Distance:	up to 80 m
Delivery Pressure:	up to 40 bar
Drive Motor:
Conveying Section:	3,0 kW / 4,0 kW, 400 V, 50 Hz
Mixing-Pump Section:	7,5 kW, 400V, 50 Hz
Rotary Valve Motor:	0,75 kW, 400V, 50 Hz
Electrical Connection:	400 V, 50 Hz, 3 ph
Fuse:	35 A
Power Cable:	5 x 4,0 mm²
Water Connection:	¾” water hose with GEKA coupling
Dimensions:	approx. 1100 x 500 x 600 mm
Weight:	approx. 41 kg

The m-tec connect® EMP MO is specifically designed for the efficient processing of dry mortars in combination with an m-tec silo. This innovative silo mixing pump features the patented m-tec® mixing system, ensuring excellent mixing and consistently uniform material consistency.

Application Areas

The m-tec connect® EMP MO is ideal for applications requiring continuously uniform material quality.

Standard Delivery Includes:

Compressor with automatic shut-off
Water pump
Rotor/Stator
Spray gun

Accessories:

Additional equipment options include:

Mortar hoses
Glue guns
Various rotors and stators

Key Benefits:

Optimal mixing and high conveying distance
Easy handling and reduced cleaning effort thanks to PU components

Cleaning:

PU components enable easy cleaning and reduce material buildup compared to metal components, resulting in quick and residue-free cleaning.

Mixing:

The patented sump mixing principle and extended mixing times provide uninterrupted operation with consistently high mixing quality.

Operation:

The clearly structured control elements allow intuitive use for all tasks on the construction site.

Handling:

The long conveying distance reduces the need to reposition the silo and machine, creating an efficient and dust-free system for processing dry mortars. EasyClean components simplify the cleaning process.

Cutting-Edge Technology:

With the m-tec connect® Monitoring function, machine data is collected, processed, and made available in the m-tec connect® Cloud. These data support remote troubleshooting, preventive maintenance, and enhance the machine's safety and efficiency.

m-tec® – Technology for Better Building:

m-tec® is a leader in the development and manufacturing of construction site technology, from traditional to modern construction needs. With products in almost 100 countries worldwide, we continually improve construction processes – making them more efficient, faster, and economical. Our pioneering work, such as supporting the development of 3D concrete printing, sets us apart and contributes to the success of new technologies.

Technical Data

Flow Rate:	approx. 13 – 47l/min (depending on variant and rotor/stator)
Delivery Distance:	up to 80 m
Delivery Hight:	up to 30 m
Delivery Pressure:	up to 40 bar
Power Supply:	3,0 kW / 4,0 kW, 400 V, 50 Hz (depending on variant)
Fuse:	35 A
Power Cable:	5 x 4,0 mm²
Plug:	32 A, 5 p, 6 h
Water Connection:	¾“ water hose with GEKA coupling
Dimensions:	approx. 2200 x 850 x 1800 mm

Flow rate, conveying distance, and height depend on the material being conveyed, as well as the rotor and stator used.

Redesign of the SMP-FE: Advanced Technology for the Highest Demands

With the redesign of our proven SMP-FE silo mixing pump, we continue the advanced two-chamber mixing technology and combine it with easy-to-clean materials like polyurethane (PU). For optimal mixing, the SMP-II-FE uses our patented mixing principle, and we have increased the mixing volume by 40%.

Retrofit Capability: Innovation Meets Durability

One outstanding feature of the SMP-FE is the ability to retrofit these innovative features onto existing SMP models.

Dual Mixing System

The m-tec-developed dual mixing system of the SMP-FE ensures consistent mortar consistency with two separate mixing zones. This technology, combined with our patented sump mixing principle in the SMP-II-FE, allows for excellent, homogeneous mixing. The 40% increase in mixing volume also improves mortar quality, even with difficult-to-mix products.

Optimized Handling

The extensive use of PU components reduces material adhesion in the wet area. Along with galvanized steel frame components, this significantly reduces cleaning and maintenance effort.

High-Powered Drive Option

The SMP-II-FE can also be equipped with a particularly powerful 9.0 kW drive, enabling impressive output rates of up to 140 l/min.
With these features, the SMP-II-FE is perfectly equipped for the demands of modern construction sites in the 21st century.

Technical Data:

	SMP-II-FE100	SMP-II-FE150
Flow Rate	approx. 100 l/min (depending on variant and rotor/stator)	approx. 140 l/min (depending on variant and rotor/stator)
Conveying distance*	up to 120 m	up to 120 m
Conveying height*	up to 30 m	up to 30 m
Conveying pressure*	up to 30 bar	up to 30 bar
Drive motors
Mixing area	4.0 kW, 400 V, 50 Hz	4.0 kW, 400 V, 50 Hz
Pump area	7.5 kW, 400 V, 50 Hz	9 kW, 400 V, 50 Hz
Water pump	0.75 kW, approx. 60 l/min, 8 bar	1.1 kW, approx. 60 l/min, 8 bar
Electrical connection	400 V, 50 Hz, 3 phase	400 V, 50 Hz, 3 phase
Fuse	35 A	35 A
Power cable	5 x 4.0 mm²	5 x 4.0 mm²
Power plug	32 A, 5 p, 6 h	32 A, 5 p, 6 h
Water connection	¾” water hose with GEKA coupling	1” water hose with GEKA coupling
Dimensions	approx. 2400 x 800 x 1900 mm	approx. 2400 x 800 x 1900 mm
Weight	approx. 445 kg	approx. 600 kg
Required silo outlet height	approx. 1300 mm	approx. 1400 mm

Conveying capacity, distance, and height depend on the material being processed, as well as the rotor and stator used.

m-tec connect® SMP-III 3DCP – The Silo Mixer Pump for Industrial Applications

The m-tec connect® SMP-III twin-chamber silo mixer pump, when combined with an m-tec silo, enables the digital processing of dry mortar for your automation and 3D concrete printing applications. The pump capacity of the m-tec connect® SMP-III can be quickly and easily adjusted via frequency converter to accommodate different materials, temperatures, or other influencing factors. Its variable flow rate makes it suitable for a wide range of applications in automation and 3D concrete printing.

m-tec connect® SMP-III Areas of Application

The silo mixer pump is used where larger quantities of difficult-to-mix materials need to maintain consistent quality. This is especially important in 3D concrete printing.

Standard Delivery

The standard version of the silo mixer pump includes a large mixing and pumping area with a PU inlay reinforced by a steel frame, powerful motors, and control systems with a frequency converter.

Accessories

Additional equipment such as mortar hoses, rotary valves, and various rotors and stators are available.

Key Benefits

The SMP-III 3DCP is designed for tasks that involve communication with external systems and integration into advanced automation processes and industrial production with M2M control.

Mixing

The continuous mixing of materials with the best possible quality is achieved through the proven m-tec twin-chamber system.

Operation

With clearly structured control elements and cabinet features, the m-tec connect® SMP-III is perfect for tasks beyond traditional construction sites, making the work enjoyable!

Handling

Thanks to the high flow rate, time-consuming and labor-intensive repositioning of the silo or machine is no longer necessary. The SMP-III 3DCP is fed directly from a silo, with an option for sack-fed operation as well. EasyClean components simplify the cleaning process.

m-tec Technology for Better Building

m-tec develops and manufactures construction site technology for both traditional applications and the challenges of modern construction projects. From transport to the provision and application of dry mortar products on your construction site, we offer complete solutions from a single source. Across almost 100 countries worldwide, m-tec has made building better, faster, and more economical.

Our uniqueness lies in our ongoing partnerships and innovations. For example, m-tec has been a key player in the development of 3D concrete printing, contributing to the success of this new technology.