M330
Pioneering a new generation of mixing pumps.
m-tec® M330: Leading a New Generation of Mixing Pumps
With its impressive technology and our patented mixing principle, the M330 sets a new standard for a next-generation mixing pump. The metering process is controlled independently of the pumping rate, ensuring consistent material consistency that is unaffected by wear. This allows the pump to concentrate on its core task - pumping - without the need for mixing. The M330 is available in a range of voltage options, including a frequency converter version, ideal for renovation and interior construction sites without access to high voltage power.
Our Specialist for:
- Dry adhesive
- Cement plaster
- Cement screed
- Decorative plaster
- Fine plasters
- Screed
- Flowing compound
- Foam cement
- Gypsum plaster
- Insulating plaster
- Lime-cement plaster
- Lime-gypsum plaster
- Lime plaster
- Dry clay products
- Adhesive and reinforcement mortar
- Renovation plaster
- Self-leveling products
- Textured/finishing plaster
- Thin layer plasters
Application Areas:
- Construction chemistry
- Coatings
- Flooring
- Insulating
- Plastering
- Renovation
Suitable Rotors/Stators:
- Rotor m-tec® uni-star / Stator m-tec® uni-star
- Rotor m-tec® uni-star 2 / Stator m-tec® uni-star 2
- Stator m-tec® uni-star 1.25
- Stator m-tec® uni-star 0.25
- Stator m-tec® uni-star 0.5
- Rotor m-tec® uni-star 3 / Stator m-tec® uni-star 3
Technical Data
| M330 – 400V | |
| Flow Rate: | approx. 24 l/min (depending on screw pump, 6-60 l/min) |
| Delivery Distance: | up to 50 m |
| Delivery Height: | up to 30 m |
| Delivery Pressure: | up to 30 bar* |
| Motor Feed Section: | 2,2 kW, 400 V, 50 Hz |
| Motor Mixing Pump Section: | 4,0 kW, 400 V, 50 Hz |
| Compressor: | 0,9 kW, ca. 250l/min, 4 bar |
| Electrical Connection: | 400 V, 50Hz, 3ph |
| Fuse: | 25 A |
| Power Cable: | 5×4 mm² |
| Water Connection: | 3/4" water hose with GEKA coupling, required water pressure min. 2.5 bar |
| Weight | approx. 270 kg |
Download our brochure as a PDF here.