mono-mix II SC
The Powerful Mixing Pump for Precision Applications
The mono-mix II SC is the result of a long history of success with our most reliable and efficient mixing pump, the mono-mix. This enhanced version is specifically designed for the application of thin coat plasters and coatings on rough and uneven surfaces, as well as the application of thin coat gypsum products on drywall and airtight sealing of masonry.
Ideal for applications such as:
- Dry adhesives
- Cement plaster
- Decorative plaster
- Gypsum plaster
- Gypsum smooth finish
- Adhesive and reinforcing mortars
- Smoothing plaster
- Thin-coat plasters
Application fields:
- Construction chemistry
- Coating
- Insulation
- Plastering
- Renovation
Recommended accessories:
- Mortar hose, air hose
- Fine plaster spray gun
- Rotors/Stators
- Spray device, adhesive gun
- Mixing shaft, pump end piece
- Stator and Rotor mono-star
Selected Rotors/Stators:
- Rotor m-tec® B4-1.5
- Stator m-tec® B4-1.5
| Technical Data | mono-mix-II SC |
| Flow Rate: | Standard approx. up to 6.5 l/min (setting 4), variable with other screw pumps and conversion kits |
| Delivery Distance: | up to 15 m |
| Delivery Rate: | up to 5 m |
| Delivery Pressure: | up to 20 bar |
| Drive Motor: | 3,0 kW |
| Compressed Air Supply: | 1,1 kW, approx. 230 l/min, 3,5 bar |
| Electrical Connection: | 230 V, 50 Hz, 1 ph |
| Fuse: | 16 A |
| Power Cable: | 3 x 2,5 mm² |
| Plug: | 16 A 3 P 6 h |
| Water Connection: | 3/4" water hose with GEKA coupling, required water pressure: min. 2.5 bar during operation |
| Dimensions: | approx. 1430 x 670 x 1150 mm |